شحن وتركيب مجاني لأول طلب
How to Connect LiFePO4 Batteries Correctly
Parallel connection increases capacity and holds voltage; series increases voltage. Finished 51.2V packs are normally paralleled only, unless the model is built for high voltage.
Products in stock
In depth
Before paralleling, charge each unit to a similar voltage (within about 0.5V) to avoid a high balancing current at the moment of connection.
Use cables of identical length and cross-section for every unit; unequal lengths share current unevenly and overwork one pack.
Fit a properly rated breaker or fuse on each positive lead or on the bank, and link the BMS to the inverter over CAN or RS485 when supported for coordinated charging.
Related products with specs and prices
| Product | Specifications | Price (SAR) |
|---|---|---|
| بطارية ليثيوم 100 أمبير 12 فولت LifePO4 | 12V / 100Ah / 1.2kWh | 725 |
| بطارية الليثيوم 12 فولت 100 أمبير (بتقنية LiFePO₄) | 12V / 100Ah / 1.2kWh | 1100 |
| بطارية ليثيوم 12 فولت 100 أمبير 1.28 كيلو وات LiFePO₄ | 12V / 100Ah / 1.28kWh | 1170 |
| بطارية ليثيوم طاقة شمسية متطورة (12.8V / 200Ah) | 12V / 200Ah / 2.4kWh | 1230 |
| بطارية الليثيوم LiFePO4 القابلة لإعادة الشحن – 12.8 فولت، 100 أمبير | 12V / 100Ah / 1.2kWh | 1250 |
| بطارية 200 امبير (جوجرين) ليثيوم – 12.8 فولت , | 12V / 200Ah / 2.4kWh | 1370 |
| بطارية ليثيوم 200 أمبير 12.8 فولت LifePO4 | 12V / 200Ah / 2.4kWh | 1390 |
| بطارية ليثيوم طاقة شمسية متطورة Go Green) – 25.6V / 100Ah) | 24V / 100Ah / 2.4kWh | 1500 |
Common mistakes to avoid
- Comparing amp-hours only and ignoring voltage, ending up with four times less energy than needed
- Discharging lead acid below 50%, which cuts life to less than half
- Picking a bank that does not match the inverter voltage, so charging fails or runs inefficiently
- Thin cable or a long run between bank and inverter, causing voltage drop and lost power
- Mixing new and old packs, or different capacities, on the same bus
Next step
Send your load list and required hours over WhatsApp, or use the on-site system calculator to size the battery bank and array.
Technical advice is free, and the recommendation is based on your real consumption, inverter voltage and installation location rather than on the largest battery in stock.
Frequently asked questions
Can I parallel different capacities?
Not advisable; the smaller pack works harder and ages faster.
Do I need BMS communication?
Not mandatory everywhere, but it gives more accurate charging, better protection and correct state-of-charge on the inverter.
Related pages
Internal page ID: EN-GUIDE-000015